 |
 |
 |
|
| i-Drive 7 3.0 Full Suspension Mountain Bike |
|
|
|
|
|
 |
|
 |
|
Features
- Specifications
- Color(s):
- British Skye
- Size(s):
- Small, Medium, Large
- Frame:
- New design 6061 heat treated i-Drive, with sealed main and bb pivot bearings, 7 inches of rear wheel travel
- Rear Shock:
- FOX Vanilla R, coil sprung, gas charged with rebound damping
- Fork:
- Manitou Stance, single crown, 150 mm of travel, 20 mm through axle, preload adjustable, rebound adjustable.
- Crankset:
- Truvativ Ruktion, 24-36 heat treated steel rings with composite bash guard, steel pedal inserts
- Bottom Bracket:
- Truvativ Howitzer freeride BB with double row sealed bearings
- Pedals:
- Truvativ Hussefelt, heat treated Cr-mo spindles and cartridge sealed bearings
- Front Derailleur:
- Shimano LX Dual Pull
- Rear Derailleur:
- SRAM X 7 nine speed
- Shifters:
- SRAM X 7 nine speed
- Rear Cogs:
- SRAM PG -950 cassette 11-34 tooth
- Chain:
- Shimano Nine Speed
- Rims:
- Alex DP-20, free ride specific, heat treated aluminum, double wall with double eyelets
- Tires:
- Tioga 2.5 Blue Dragon front and Tioga 2.3 Blue Dragon rear
- Front Hub:
- Sealed bearing, 20mm through axle, cold forged, heat treated for disc brake, 36 spokes
- Rear Hub:
- Sealed bearing, 12mm through axle, cold forged, heat treated for disc brake with cro-mo steel freehub body, 36 spokes
- Spokes:
- Chrome plated, Stainless Steel 14 guage
- Nipples:
- Chrome plated brass
- Front Brake:
- Hayes Sole, hydraulic fluid actuation, cold forged caliper with 180mm stainless steel rotor
- Rear Brake:
- Hayes Sole, hydraulic fluid actuation, cold forged caliper with 160mm stainless steel rotor
- Brake Levers:
- Hayes Sole open system lever with cold forged blade.
- Handlebar:
- Truvativ Hussefelt, 6061 heat treated aluminum with 31.8 mm over size clamping area, 50 mm rise and 680 width
- Stem:
- Truvative Hussefelt, forged 6061 heat treated aluminum with 31.8 mm over size 4 bolt clamp
- Grips:
- GT Lockdown, co-molded locking grip with 2 mm allen key adjust
- Headset:
- FSA "Hammer" Cro-mo sealed bearing free ride specific, 1 1/8" with stainless steel Japanese bearings
- Saddle:
- SDG new Bel Air with two tone cover and SDG logos
- Seat Post:
- Truvativ forged head with 2 bolt clamp, 6061 heat treated shaft 350mm
- Seat Clamp:
- Cold forged GT QR and collar with oversize blade
|
|
|
 |
|
 |
|
|
| Accessories for this product... |
|
|
|
|
